Bestway Baby Pool is a portable swimming pool specifically designed for babies and children with the best design and features, Baby Pool is perfect for your child to practice knowing water, practicing swimming, breathing exercises in the water, and also responding to children's motor sensors, this swimming pool is easy to move around and easy to carry and doesn't take up too much space. With this pool, parents can keep an eye on their children at any time.

Features

• Inflatable Square Pool
• Thick Insulation
• Comfortable inflatable bottom to prevent slipping
• Easy to set up
• Built-in Drain Plug (Easy drain)
• Suitable for Babies (between 0-3 Years Old)
• Suitable for long-term use
• Particularly suitable for travel (Easy to fill and Drain)

Specifications

• Item: Bestway Inflatable Square Infant Swimming Pool
• Brand: Bestway
• Material: 0.2mm PVC
• Dimensions: 120*105*75cm
• Applicable Age: 0-3 Years old
• Water Storage: 380 liters (80%)
• Colours Available: Transparent Blue, Warm Yellow (Subject to Availability)

Warning: Use only under adult supervision.

Pool Usage Instructions

Preparation before assembly

1. Find a solid ground and remove the debris from the floor. Note: Do not install the pool under an electric wire or tree.
2. Carefully remove the pool and its accessories from the box
3. If a cloth is available, please spread the cloth on the floor at the selected location..
4. Check the drain valve of the pool, to ensure it is firmly plugged.

Installation of the tank installation without other tools. (By 2-3 people only 5 minutes to complete)

1. Expand the pool and place all the accessories on the floor near the pool.
2. Use a pump to inflate the pool (pump is not included). After inflation, ensure the safety gas plug is closed. Note: Do not inflate if the pool is rigid. The pool should be stable before inflation.
3. Use a mobile sink to drain the drain valve close to the drain. Note: to avoid damage caused by sharp objects, do not pull the pool on the ground.
4. Once you have filled water into the pool. Get into the bottom of the pool and smoothen the wrinkles at the bottom (starting from the center of the pool, clockwise to the outside).
5. Continue to fill water until it reaches 80% of the pool capacity. Please carefully ensure that you do not fill more than 80% of pool capacity.

Use of drain valve

1. Get out of the pool and unscrew the drain valve lid.
2. Connect one end of the pipe to the drain valve and the other end to the drain Note: The drain valve has a control loop to control the flow of water.
3. Once the water has been drained, tighten the control loop and close the drain valve.

Note: Store in the place where it cannot be reached by children.

Reminder

1. Please do not use washing or any other form of chemical agent to clean the product.
2. First time installation may cause some slack because the PVC material will take a while to adapt to inflation.
3. Only fill 80% of the pool with water, so as not to cause damage to the drum package.
4. Do not place the product near fire and high temperature objects.
5. Do not let any sharp object near the pool.
6. We recommend to purchase and keep the Bestway special repair glue on standby.
7. The pool should be used under adult supervision, do not let children play with any sharp or hard objects while using the pool.